創麗佳 GR-01C光固化無影膠粘合劑（玻璃/玻璃 高強度）

【所屬系列】

       綠緣GREENER-01系列光固化無影膠

【產品特點】

 單組份包裝，使用方便；可用紫外光或太陽光固化，固化速度快，并有如下特點：

光學性能： 膠液晶瑩透明，固化后光透過率﹥90%，折光系數與玻璃相近。

粘接性能： 固化后體積收縮率小，延伸率大，粘接強度高。

耐候性能： 耐候性好，經紫外光長時間照射不黃變,可在-50℃—+80℃的溫度范圍使用。

【產品用途】

 可廣泛用于光學儀器、醫療器件、工藝品、燈飾、家具及衛浴等透光材質的粘結或封裝。

【產品用法】

 先將被粘物表面清洗干凈、晾干，滴少量膠液于被粘物，壓緊表面，排出膠層內的氣泡，用高壓汞燈（功率～250 w）在～3cm燈距照射～30秒，或直接用陽光照射～5分鐘即可固化。

本產品的最佳固化條件：在紫外燈下照射30~60秒，待其定位后，在太陽光下放置10分鐘以上。固化時間對本產品的粘接強度有非常大的影響，延長光照時間對提高粘接強度十分有利，太陽光下放置時間越長，強度越高，建議時間為30分鐘。（如需做破壞實驗，務必將粘好產品放置半天后測，才能體現優質效果，記著！要放置在亮光處或陽光下哦^-^感謝配合?。?/span> 

【注意事項】

 該產品未固化前對皮膚有輕微刺激，使用時要避免與皮膚直接接觸和吸入蒸汽，防止滴入眼睛，用后請用肥皂水清洗可能接觸的皮膚。固化后的膠層無毒無刺激。

【性能指標】

【包裝規格】每箱250ML/支×40支、1KG/瓶、25KG/桶、200KG/桶。

創麗佳，品質佳～！無影膠，首選創麗佳！

創麗佳熱忱歡迎廣大新老客戶垂詢、索樣和惠顧!

************************************************************************************************

【ITEM NAME】GR-01C UV adhesive (Glass to Glass) 

【FEATURE】Single-component packing; Simple usage; cures in seconds upon exposure to UV visible light or UV lamp; 

【USE FOR】UV curing adhesives specially for all metals and transparent materials such as crystal, glass, polar plastic, etc.

【DIRECTION】

1. Clean the surface of substrates and airing.

2. Spread enough adhesive on the substrate, and fix another one onto it. Impact the surface and educe the air bladder.

3. irradiating ~60 seconds with a mercury lamp (Power～250 w) at a distance about 3cm,or irradiating 1 minutes with sunshine can be cured (the boning time have difference because the different materials, distance and lamp), the performance will attain the best after placed 1 hour.

【CAUTION】

1. Avoid exposure to the sun or UV light.

2. They can arouse eye irritation. Avoid contact with eyes and skin. Washing with large water if contact with copious quantities of water and seek medical advice when in serious cases.

【WARNING】

1. The optimum method to cure is to be exposed 30~60 seconds in UV lamp, after fixing put the adhesive surface in the sun for over 10 minutes.

2. Exposure time has great influence on adhesive intensity. The longer time exposed in the sun, the better intensity can be obtained. The suggested exposure time is above 15 minutes.

Great glue at best price here we are!

Welcome to contact us and transact business with us!

                                      **版權所有 文字嚴禁復制**